Shelyak Instruments Spacer for Star Analyser


The Star Analyser 100 has been designed to work with the smallest commonly used sensor chips and the range of camera nosepiece designs commonly encountered. Some cameras have larger chips and/ or shorter nosepieces and so would benefit from an increase in distance of the device from the sensor.

The minimum recommended distance (in mm from the sensor to the tip of the nosepiece where the Star Analyser 100 screws in) is 4x the camera pixel size in microns. For example, for the ToUcam webcam, the distance would be 5.6x4=22.4mm. If you find that the distance for your setup is less than the minimum value, we recommend purchasing sufficient spacers to bring the distance above the minimum.

Each spacer adds an adjustable 7-10mm. To date, the following cameras are known to benefit from the use of spacers.

Camera model
Nbre of spacers
Meade DSI prono need
Meade DSI1
Meade LPI2
Celestron Neximage1
other models
contact us

Add to Cart:

  • Model: SI_BA0014
  • 1 Units in Stock
  • Manufactured by: Shelyak Instruments

This product was added to our catalog on Wednesday 08 August, 2012.

Your IP Address is:
Copyright © 2022 Eridanus Optics CC. Powered by Zen Cart
eStart Your Web Store with Zen Cart(tm)